When it comes to the TV antenna
market, it’s no secret that the majority of users who buy one live in rural
areas. This is where you’ll notice most of the benefits of an antenna, and
there’s also the fact that an antenna may be the only way to get a signal in
some rural areas.
However, with many users who are
about to buy one, but aren’t sure about their investment, there’s a dose of
skepticism. There’s always one question popping up – if no cable provider can
get TV to my home, how can a single device do that instead? Will a TV antenna
work in rural areas? Or is it a waste of money.
Well, the short answer is that
yes, a TV antenna will work in rural areas, but there’s a bit more to it.
Therefore, read on as we discuss a few main types of TV antennas and how you
can expect each to perform in rural areas. If you haven’t already check out our best rural tv antenna here.
To begin with, we’ll touch on the
most apparent division – indoor antennas and outdoor antennas. Once we’re done
with that, we’ll move on to the three main types of outdoor antennas –
omnidirectional, multidirectional and directional antennas. Without wasting any
more time, let’s dive in.
When you first need to buy a TV
antenna, you’ll be faced with the challenge of choosing between an indoors one
and an outdoor one. An indoor TV antenna is much more simple to set up – all
you have to do is plug it in and connect it to your TV set. Then, just point it
towards the broadcast tower, and you’re good to go. However, with an outdoor TV
antenna, you’ll need to assemble it, have cables run through your house, and
set it up on the roof for optimal performance. And, every adjustment you’ll
need to make should be done on the roof as well.
This sound simple, right? An
indoor antenna is better. Well, no. With any kind of antenna, the broadcast
tower’s signal should be able to reach the antenna itself. With an outdoor
antenna, you place it high on the rooftop, and you may even have a clear line
of sight to the tower, depending on your surroundings. On the other hand, with
an indoor antenna, you have walls the signal needs to go through, and that’s
the least of your issues. The signal is
highly susceptible to interference from other wireless devices, so anything else
in your room that’s wireless will negatively impact your signal.
Therefore, the conclusion is that
outdoor antenna is often the better choice. Less issues with signal interference,
and a much stronger signal result in a better viewing experience. With that out
of the way, let’s take a look at the different types of outdoor antennas, and
which one you should go for, depending on your specific situation.
As we mentioned earlier, there
are three main types of outdoor antennas – omnidirectional, multidirectional
and directional. There isn’t a “best” type, all of them have advantages in
certain situations, and all of them come with disadvantages as well.
Let’s start with omnidirectional
antennas. As their name suggests, they can receive signals from all around
them, a full 360 degrees. This makes them ideal for two scenarios: you’re
either living in a densely populated area with a lot of towers, or you live in
a rural area that also has a lot of towers in multiple directions. An
omnidirectional antenna doesn’t have a range that’s too strong, but it can pick
up multiple signals, giving you a lot of channels, provided you have towers
Next, we have multidirectional antennas. They’re similar to directional ones, but usually have a wider range coverage and can cover multiple directions at once. If you live in a rural area where you have multiple towers, but they’re all in the same general direction, this might be the one to go for. Compared to an omnidirectional antenna, their range is significantly better, but it’s not as good as a directional antenna’s. However, if you know you have multiple towers nearby, all in the same general direction, chances are they’re close enough and you don’t really need all that much range.
Last but not least, we’ve got
directional antennas. They’re the favorites of people who live in rural areas
where the broadcast towers are far away from them. They do have quite a lot of
range, often up to 150 miles, and even when bad weather does impact signal
reception, you still have quite a bit to spare. The downside is that you must
have them pointing in the exact direction of the broadcast tower for them to
work well. This can be a finnicky thing to set up, but once you’ve got it up
and running, you should be good to go. If you have a single broadcast tower, or
two, that are in the same line of sight, a directional antenna is definitely
the best antenna for you, even though it’s difficult to set up.
At the end of the day, the answer
to our initial question on will a TV antenna work in rural areas is definitely
yes, but different antennas will give you different performance. Depending on
your location, your surroundings, and your expectations, you can choose one of
the types we discussed earlier. If your home can accommodate it, by all means
go for an outdoor antenna, and which one you go for depends on your specific
situation with the broadcast towers.
When it comes to TV antennas, there’s often a few dilemmas. Do you go for a cheaper one, with less range, or do you spend a bit more but get something that has quite a lot of range? Do you get an omnidirectional antenna that gets a lot of different signals at the cost of range, or do you get a directional one that has a lot of range but can only receive a signal from one tower?
The answers to all of these questions often depend on your specific situation, but there’s one thing that’s often more common than you’d think – the love for a long range TV antenna. It’s particularly a favorite of users who live in rural areas, where the broadcast towers are often far away and you do need the range.
But why so much love for that particular type of TV antenna? Well, there are a lot of benefits to it, and little to no downsides, so let’s take a look at some of the benefits of a long range TV antenna, and see why people favor it over the other types.
The first benefit is very obvious – it’s the range itself. There are a lot more users who live in rural areas than you’d think, and not all of them have a broadcast tower in their near vicinity. Some even live as much as 120 miles far from their nearest tower. In
these kinds of situations, unless you have a long range TV antenna, you’re practically getting no signal at all.
When it comes to long range TV antennas, there’s somewhat of a standard for the good ones, where the range is usually 150 miles. Take this with a grain of salt, though, as you’ll only get those 150 miles in absolutely perfect conditions with no interference at all. Since this is seldom the case, the more realistic number you can expect is usually around 110 to 130 miles, which is still outright impressive.
Let’s say you aren’t one of those users who lives 120 miles away from their nearest tower. Let’s say you’re receiving the signal from 60 miles away. If this is you, you might be thinking “I’ll save some money and get a 75 mile range antenna – it still has 15 miles to spare for bad weather and interference”, and to some extent, you’d be right.
However, what happens when there’s really bad weather, or there’s truly a lot of interference? You’ll be pushing your antenna to the limits, and chances are you’ll have a less than stellar TV watching experience. Enter the long range TV antenna. With a 150 mile range, even truly bad weather or plenty of interference can take out no
more than 50 miles of range from the maximum, which still leaves you with 100
miles. If your broadcast tower is 60 miles away from you, you’ll be receiving
the full signal quality with absolutely no losses. Wouldn’t you prefer this, to
having a wobbly connection that might drop any minute?
When you’re looking at the good, higher-end TV antennas, the price difference between a short-range antenna and a long-range TV antenna is often fairly small. With the benefits we just discussed above, it’s actually not a tough choice to make.
Even if you don’t really need the range, and the broadcast tower is close to you, you still get the peace of mind of knowing that even if the weather is disastrously bad, you won’t notice a difference when you’re watching TV. This makes the price difference very well worth it.
And even if you aren’t looking at the high-end models, you can still find good long range TV antennas that don’t cost too much. They may not have 150 miles of range – they’ll top out at 100, for example, and they may not have additional features such as a built-in amplifier or a motorized, rotating base. But they’ll still perform admirably
and you’ll get the benefits we just discussed.
While debating whether to get a short range or a long range TV antenna, there aren’t actually hundreds of benefits. There are two main ones, but both of them are a very compelling reason to spend the extra money. If you want your peace of mind, and think you may use the extra range once in a while, the benefits of a long range TV
antenna far outweigh the minimal price difference.
When you’re looking to get a long-range TV antenna, the options are seemingly endless. You’ll come across various options, from different brands – you’ll even come across DIY options that you could try yourself. One thing those DIY options do? They copy the design of ClearStream’s antennas. This speaks volumes to how good the ClearStream actually is. You can also see our guide on the best long range tv antenna here.
This is why we have decided to make our ClearStream 4 Outdoor Long-Range TV antenna review, because this is one of the best long-range antennas you can get. Even though it’s fairly expensive, it’s actually pretty much worth it. Without wasting any more of your time, let’s take a look at why is it so good.
The first thing you’ll notice with the ClearStream 4 is the design. You may be surprised, but the unique loop design is actually patented. It has a 180-degree reception angle, which results in a very broad reception of UHF frequencies. With a multidirectional reception, the need to have it facing exactly at the antenna is somewhat negated.
It’s not just the distinctive loops – the mesh wiring behind the loops are actually signal-enhancing reflectors. They focus the receptive power of the antenna, which doesn’t only minimize signal multipath interference, but helps with the power and range quite a bit.
One interesting things that should be mentioned, is that the ClearStream 4 can be painted if you want it to match your home’s exterior. This isn’t too much in terms of functionality, but for aesthetics, it goes a long way.
When you get the ClearStream 4, you’ll find that it advertises a 70-mile range. With most outdoor (and some indoor) antennas, the advertised range can be achieved only in perfect, near laboratory-level environments. Even a single tree, or a single building, can have a massive impact. That’s why almost none of those 150-mile antennas actually give you 150 miles. With the ClearStream, things such as obstructions do have an impact, but it is actually much less noticeable. In great
conditions, you have 70 miles. In sub-par, that may drop to 55 or 60, which is
truly a small difference. As we mentioned with the design, the multi-directional elements help quite a bit with the reception.
In terms of the signal, 12.25dB is plenty, and you’ll be able to receive UHF channels. The output to your TV will come in 1080p, full HD, which should be pretty good – but you should also have good signal reception for that.
The last thing isn’t that much of a feature, but it’s important. ClearStream give you a lifetime warranty on the antenna, which is one of the reasons why it’s so expensive. If anything goes bad, they’ll replace it for you and you’re good to go.
The ClearStream 4, for obvious reasons, does not come preassembled. However, assembling the frame, reflectors and loop elements is very easy. All you need is a Philips screwdriver, as well as an adjustable wrench, and you should be done in no more than half an hour. This is a lightweight antenna, so mounting it on a mast afterwards shouldn’t be an issue.
An interesting thing to note is that the antenna is also reported to work indoors – whether it’s in a room, or in the attic. If you can’t mount it outdoors, this is another option. Note, though, that because of the construction of your home, the thick walls and metal roofs, you may actually end up losing up to 40 or even 50% of your signal.
Once you’ve got it installed, you’ll want the front end to be aimed towards transmission towers. The two panels are actually rigid, so you’ll need to aim it yourself when you’re installing it on the mast. Setting it up shouldn’t be too difficult, and something like TVFool can help you quite a bit, too.
The ClearStream 4 is a very interesting proposition. On one hand, it costs a lot. On the other hand, you’re getting excellent range, a 180-degree design, all packaged in a lightweight antenna that works admirably.
If you’re going to be using the ClearStream 4 indoors, there are better options. You’re pretty much halving your range, and you’ll almost never see all the benefits of the antenna. If, however, you need it for outdoor applications, few can do better than the
ClearStream, and even fewer with all the extra features. It’s certainly a great buy.
Users of TV antennas have, for the longest time, bothered with one major issue – range. Range can significantly impact the availability of TV channels, as well as how well you’re receiving them, so the implications are pretty big. Sure, nowadays there
are some really good outdoor TV antennas with great range, but if you’d rather
save some money, that’s not your best choice.
To help you out, we’ve made a DIY guide on how to make a TV antenna booster. It works for both indoor and outdoor antennas, and you can make it out of very basic materials. It also doesn’t require too much skills, so you should be set to go regardless of how much DIY experience you have.
Before we get into the how, let’s take a look at who actually needs one. You may think you do, but your problem may stem from something else.
To begin with, if you’ve got a directional antenna, you should first check how well it’s adjusted. Maybe a wind or bad weather moved it and it’s no longer receiving the full signal? In this case, a mere readjustment will do.
If you’re using an outdoor antenna, you should also inspect it, physically. It may be damaged, or there might be something on it that’s blocking it, or preventing it from receiving the full range.
If you’re struggling with your TV watching experience, and none of these things is true, then yes, you should consider the best amplifier. So, let’s take a look at how to make a TV antenna amplifier. Oh, and one important thing. Make sure you read through the entire guide before you begin, so you know exactly what you need and what you’re getting into.
First things first, materials. All you’ll need is cardboard and some aluminum foil. If you’re using it outdoor, you might want to grab something to cover it as well, since neither of these materials is waterproof. In terms of tools, a pen or marker, and a sharp utility knife or scissors are all you’ll need. There’s no specific knowledge
required here – all you’ll need is to be careful and follow the instructions word for word.
The first thing you’ll want to do is take your marker, or pen, and your piece of cardboard. Draw a circle on the piece of cardboard. Once you’re done with this, also draw a pair of semi-circular projections. There should be two of these, on either side of the circle. They should be located just above, and just below the midpoint of the
circle. When compared to the circle, they shouldn’t be too large.
The next step is to grab some more cardboard, and cut another piece of it into a rectangle. The length should be a bit longer than the circle’s diameter. The width, however, should be a bit less than the circle, but it should extend further than the projections you drew at either end of the circle. With this, you’ll be making a reflector, so consider it when you’re thinking about the sizes and how they relate to your
Grab the two pieces of cardboard, and cover one side of each with the aluminum foil you have. Next, you’ll want to fold the long piece of carboard around the circular piece. Then, fold the circle in half. You should cut slots in the rectangular piece, and the projections on the circular piece should fit in those slots like tabs. Once
you’re done with everything, the entire “contraption” should remind of a semicircle.
The next step is to fold the circle’s outside edge. You should form a lip, one that extends through the entire length of the piece. You’ll have the foil-covered circle suspended in the other piece. Grab what used to be the circle, and is now a semicircle, and cut a small hole in the middle. Don’t make it too large – just the antenna should fit inside. Attach the amplifier over your antenna, and you’re good to
We know – cardboard and aluminum foil sound more like a conspiracy theory than something that has an actual effect. However, knowing how to make a TV antenna amplifier like this is actually a pretty useful thing, and you’ll notice that signal reception is quite a bit better. You will get a bit more range, but more importantly, you’ll get a much higher quality out of your TV channels.
When shopping for a new antenna, there are a lot of questions that you’ll need to answer before you choose. However, one of the first ones you’ll come across, and the one that will potentially make the most difference, is whether to get an omnidirectional TV antenna, or a regular, directional one. There’s also the middle of the road – a multidirectional antenna.
Before we get into the details, we should clarify one thing. There is no one solution as to which is the best TV antenna. Some will be better for one type of situations, while others excel in a completely different environment.
An omnidirectional antenna can be better than a regular one, so let’s take a look at the situations where this is true, and why.
This is obvious from the name, but we still feel we should mention it. An omnidirectional antenna has a 360 degree reception, which ensures that you can pick up a signal, regardless of where it’s coming from. This is also the most notable advantage it has over a directional antenna.
So, where is this important? Well, if you live in a rural area, you don’t really need this. Chances are you have on or two broadcast towers nearby, and a directional antenna can cover you quite easily. However, things change significantly when you live in an
urban area. By urban, we mean a city, or another location that has quite a lot of buildings and other objects surrounding you. These locations tend to have a couple of broadcast towers scattered around, and you can pick the signal up from any of them.
Omnidirectional antennas are very useful in such a situation because of the way it works. It doesn’t just receive the signal straight up from the broadcast tower, it also receives it when it’s bouncing from some of the surrounding buildings. This helps significantly with signal reception and quality, and often results in excellent image at the users’ end. This is also why in a rural area, a regular, directional antenna is the better option – there are no buildings the signal can bounce off of.
Receiving signal from multiple directions is significantly more difficult than receiving it from a single direction. This is why omnidirectional antennas often have less effective range than their directional competitors.
Nowadays, though, most (if not all) manufacturers of omnidirectional antennas will include some kind of amplifier with the antenna. It’s usually built-in, so you won’t even notice it, but it does make quite the difference when it comes to the signal.
It helps with two things – range and signal quality. If a tower is slightly out of range, the amplifier may just boost the signal enough for it to be into range – so you’ve got an extra broadcast tower to receive a signal from. Also, if you have a tower that’s
within range, but the signal does lose quality every once in a while, with an amplifier that won’t be an issue for too long. The signal will be amplified when received, and you’ll be able to enjoy full image quality once again.
The simple answer here is “No”, because there are situations where an omnidirectional antenna is actually the worse choice. If you need a lot of range, or you aren’t surrounded by towers, you don’t need it and you’re better off with a directional antenna.
However, for everyone that lives in an urban area, such as a densely populated city, an omnidirectional antenna will almost always be better. The first advantage is the fact that it’s omnidirectional – you’re surrounded by broadcast towers, you should want to receive signal from as many of them as possible. The second is the built-in
amplifier, because whatever tower you’re receiving from, this will help you get a better signal and a better image.
At the end of the day, even though not for everyone, an omnidirectional antenna does have quite a lot of advantages over a regular one. Rural users may not see the benefits, but if you live in a city, using one can be an excellent first step towards cutting your TV watching costs down to a minimum.
Almost every time you mention buying an omnidirectional antenna, you’ll get comments along the lines of “you’ll never get good reception” or “you don’t have broadcast towers surrounding you”. And while these may be right for some folks, there are others, that live in densely populated areas, that could very much use an
If you’re one of those folks, we’ve got an excellent suggestion for you – the Lava OmniPro HD8008 review. We’re taking a look at one of the best omnidirectional antennas you’ll come across on the market nowadays, and it’s one that doesn’t cost too much either. Without wasting any more of your time, let’s take a look at the details of the OmniPro HD8008, and see whether this should be your next investment.
Kicking things off with the outside, we have to be honest – the design isn’t really impressive. It looks very simple, and yes, we don’t want to use “ugly”. When you mount it, you have a circular antenna with two metal pieces sticking out. However, the design of the OmniPro isn’t meant to look good. Instead, it’s meant to be functional, and be able to receive signals from all directions. There’s one more thing here – the antenna has anti-UV coating and is completely waterproof. If you’re worried about the weather damaging it, you shouldn’t be. And, it’s also shielded, to
reduce interference as much as possible.
Inside the box, it will also come with a mounting pole. The pole has an adjustable angle for the base pivot, which lets you set it up for flat, vertical or angled use. There are also wall mounts and brackets, if that’s the route you want to take with your antenna. It’s one of those options that let you set it up basically any way you want it.
Oh, you can also rotate it 60 degrees to get even better reception.
Now, we’re talking about an “omnidirectional” design all the time. But what is that, anyways? Well, with a regular antenna, you’d have to point it towards the direction of the broadcast tower. However, if you have an omnidirectional one, it is able to receive
channels from any direction. This makes it much better for densely populated
areas, where there are a lot of surrounding towers, and plenty of objects for
the signal to bounce from.
And while this design does come with one big loss – range, the HD8008 actually deals with this quite well. The ideal distance is anywhere between 40 and 80 miles, depending on the conditions, as well as the signal and the surrounding objects. If you give it ideal conditions, though, it can easily reach over 100 miles of range. For an
omnidirectional antenna, this is truly impressive. What helps quite a bit here,
actually, is the built-in amplifier. It has high gain, but very low noise, which allows it to function very well.
A functional design and excellent specs “on paper” don’t make an outdoor antenna great – the functionality does. The antenna has a built-in dipole that allows you to receive both UHF and VHF signals, as well as FM, making for a very versatile option. There’s also DVB-T, DMB-T/H, ATSC and ISDB-T. With this, you can expect both 1080p, Full HD image, as well as 4K images on your TV set.
Just like with most large items you could order online, the HD8008 doesn’t come preassembled. However, assembling it and setting it up on the pole should be a piece of cake. All the components are included, so you can get things up and running in no time.
A huge benefit is that you don’t have to aim for the broadcast towers. With an omnidirectional design, you should be able to receive channels regardless of how you set it up.
As we mentioned in the beginning of our Lava omnidirectional TV antenna OmniPri HD 8008 review, an omnidirectional antenna isn’t good for everyone. If you live in a rural area, and find that you don’t have many towers around you, a directional antenna may do a better job.
However, if you live in a city, or other urban area with a lot of tall buildings the signal could bounce off of, and you have a couple of towers surrounding you, you’re actually pretty much set to go with the HD8008. You’ll get a lot of free channels, and chances are you’ll be able to completely cut the cord!
A TV antenna can be a great thing to have. However, while many think that the main reason to use one is cutting costs on cable subscriptions and other similar services, that’s actually not really the case.
Sure, if you live in the city, you could very well get an omnidirectional antenna and grab a few free TV channels. But the real use of a TV antenna is for users who live in rural areas. Not a lot of subscriptions and cable services are available there, which makes watching TV more or less impossible.
And this is where the main benefits of a TV antenna for rural areas come in – you’ll be able to watch some of your favorite channels, often for free. Let’s take a look at this and other benefits of TV antennas for people who live in rural areas.
This is the first and most important benefit of a TV antenna if you live in rural areas. As we mentioned, depending on the specific place you live in, watching TV can be an impossible task. There are many cable providers, as well as other TV watching services, that simply don’t have any kind of coverage in many rural areas. Therefore,
without an alternative, you’re stuck with no TV.
Fortunately, the alternative is a TV antenna. Whether it’s an indoor TV antenna, or an outdoor TV antenna (an outdoor one is the better option), you’ll be able to receive signals from nearby broadcast towers. All you have to do is choose one, which may or may not be tricky depending on where you live. If, for example, you have plenty of
broadcast towers surrounding you in your nearby vicinity, you could get an
omnidirectional antenna that would receive signals from most, if not all of
them. Oh the other hand, if you only have a single tower, you’ll be much better
off with a directional antenna, pointed straight towards the broadcast tower in
I know – you’re buying an antenna – how does that save you money? Well, a subscription service does add up over time in terms of pricing, and that can cost quite a bit more than a good outdoor TV antenna. One of the benefits of a TV antenna for rural areas is that you’re receiving free TV. Those broadcast towers broadcast their signals for free – why would you pay someone to get them to you otherwise?
One of the most common issues that satellite subscribers face is their signal going bad, or completely disappearing, when the weather is bad. Thunderstorms and rain can significantly impact the signal, and you may be stuck in your home while it’s pouring rain outside, with nothing to watch. Oh, and we won’t even discuss what happens when the satellite dish gets covered with snow in the winter.
Even though bad weather does impact TV antennas as well, the actual impact is actually nowhere as bad as it is with satellite TV. And most good outdoor TV antennas actually have weather-resistant coatings that help them keep the signal strong in these situations. If you do want to maintain your signal during bad weather, yes, an outdoor antenna is the way to go, and that’s another one of the benefits of a
TV antenna for rural areas.
Let’s get one thing out of the way. In the discussion between the number of channels between a paid TV service, and a free one, the paid one will win by a huge margin. However, those paid TV services do keep one big secret from you. Many, if not all, broadcast stations will offer at least one sub-channel, and these sub-channels aren’t
offered with your satellite or cable service. If you want them, you’ll need an antenna.
These may not be too important for you as an end user, and they do depend on your location and the specific broadcast towers you have in your vicinity. However, if you want things such as an all-weather channel, as well as some public TV channels, you’ll want to get an antenna.
It actually isn’t a secret that both cable and satellite providers will compress their signals. A broadcast tower doesn’t do this, and if you use an antenna to receive the channels, you’ll be getting the full channel quality.
There’s one thing that you must note here, and that is that you may, or may not notice the difference between a compressed and uncompressed channel. Yes, the difference is there, and if you have a sharp eye, you will notice it. And if you can, then an antenna will definitely give you a huge benefit in this regard.
At the end of the day, there’s no denying that there are certainly benefits of a TV antenna for rural areas. And anyone can benefit, whether you’re receiving no signals at all, or you want a better choice, or higher quality TV, there’s something for everyone.
If you think that some, or all of the benefits we spoke about above apply to you, by all means get yourself a TV antenna. It’s an investment, and you’ll need to be careful installing it, but at the end of the day, you’ll be saving quite a bit of money, and you’ll get a much better viewing experience.
Published March 28th 2019
Written By: Joseph Geizen (Electrician)
When you live in a rural area, TV reception can be tricky. There are even situations where local cable service providers won’t offer their services where you live, making it difficult for you to watch TV. This is where an outdoor TV antenna comes in, and that’s what will enable you to watch TV, without even paying for subscription services.
But before you get an outdoor TV antenna, you’ll want to take a look at your options. Do you get an outdoor one, or an indoor one? What are the important considerations that you should keep in mind? To help, we’ve got a list of some of the best outdoor TV antenna for rural areas options on the market today. We’ll also talk about a few specifications and considerations that will make your buying decision easier.
Low on time? Heres a quick roundup of our top 3 picks and why you need them!
#1. Tree New Bee Amplified
Best overall antenna for rural areas with 360 degree rotaton
#2. Channel master cm-4228hd
*Simplest to set up
A good alternative to our top pick with a simple installation
Excellent when you're surrounded by towers
The Best Overall Outdoor TV Antenna
The Tree New Bee amplified antenna is great for just about everyone.
This antenna by Tree New Bee is an interesting proposition. To begin with, it works with both UHF and VHF signals, and it also receives FM radio ones, too. The reception range is an excellent 150 miles, and it has high sensitivity.
The interesting thing about it is that even though it is a directional antenna and comes with all the benefits of one, it has a motor that allows the entire antenna to rotate 360 degrees. This way, you also get all the benefits of an omnidirectional antenna, without the downsides. The rotation is controlled with a remote, making things as simple as possible.
The antenna supports 720p, 1080i and 1080p signals, which is great. You can connect two TV sets to it, and there’s a built-in amplifier with super low noise. An excellent choice for the best outdoor TV antenna for rural areas.
The best multidirectional option
The CM-4228HD is a great pick if you've got a few towers in a similar direction
Our runner-up comes from Channel Master, and is another great pick for people who have a broadcast tower nearby. It performs great, and has also been proven to last a good while as well.
This is a multidirectional antenna which receives signals from up to 180 degrees. There’s a 12dB gain on the antenna which results in up to 80 miles of range. It’s not as good as our top pick’s 150 miles, but if you have a broadcast tower nearby, that won’t be an issue.
Installation is simple, as it comes almost completely preassembled. This is another antenna that works with both VHF and UHF signals, and you’ll receive channels in uncompressed HD.
The most versatile option
The 1byone is simply perfect if you have multiple towers in your vicinity
Even though an omnidirectional antenna isn’t the best choice in all rural areas, it actually works really well if you have a few towers nearby but in different directions. This is a very compact design, one which isn’t impacted as much by things such as rain or thunderstorms. There’s also the anti-UV coating which adds some shielding and reduces interference.
Install it outdoors, and you’re getting 60 miles of range. That’s not really impressive, but as we said, if you’re surrounded by towers, it’s great. You’ll be able to get UHF and VHF channels, as well as FM radio ones, and reception is possible with up to full HD video quality.
A timeless design that works great, but only with UHF channels
The 8 Element Bowtie is one of the most popular outdoor TV antennas nowadays. If you come across a guide on making your own antenna, chances are this is the inspiration for the guide. It comes with a 70 mile range and really easy installation.
Even though the antenna works great and can receive full HD, 1080p signal, it only works with UHF channels. For some, this may actually be enough, but we would’ve liked to see VHF, and potentially FM radio support.
In terms of construction and durability, the Bowtie is a champ. It’s made to last, and the lifetime warranty on parts only confirms that. If you’re after the best outdoor TV antenna for rural areas and want one made by a reputable manufacturer, this is a great option.
A very popular model with a great reputation
Another extremely popular option is RCA’s Yagi outdoor antenna. It’s a directional antenna that boasts over 70 miles of range, and has a really great reputation anywhere you look.
The antenna supports 1080i HDTV signals, and it has support for both UHF and VHF channels. The multi-element, cross-phase design gives you better reception, so you can have a better viewing experience.
In terms of build quality, the Yagi is excellent. It comes almost fully pre-assembled, and there’s a fold-out UHF reflector which easy-locks, as well as other elements that all snap-lock into place. Add to that the included mast, all the mounting hardware, and the transformer, and you’ll have the Yagi up and running in no time.
An attractive option with a signal that isn't impacted by the weather
Xtreme Signal’s HDB91X is a similar design to the RCA Yagi, making it a great alternative. The high-gain design allows the antenna to receive signals from over 70 miles away if you’re dealing with UHF signals, as well as from over 25 miles away if you have high band VHF signals.
It’s a completely weatherproof design which won’t be impacted as much from rain and thunderstorms, and you’ll still get the full range. It also has a 60 degree beam width, and you’re getting all the mounting hardware in the box.
An expensive antenna which performs excellent
Last but not least, we have a truly premium option by Winegard. It’s their HD8220U antenna from their Platinum series, a long range antenna which is 4K UHD ready. The range is over 65 miles, and you can receive both UHF and VHF signals. It’s also capable of ATSC 3.0, which will eventually add higher frame rates and 3D.
Make no mistake, this is a large antenna. However, it performs admirably, and is one of the best options if you want the best outdoor TV antenna for rural areas that can receive a 4K signal – none of the other competitors on our list can do that.
Even though the price may be a bit too high for some, make no mistake that you’re getting a very durable and high quality product. If you can afford it, it is more than worth it.
You took a look at what the best antennas are, but you still don’t know which one you should pick for your needs. Some of them have a longer rhttps://www.seriftv.com/will-a-tv-antenna-work-in-rural-areas/tv antenna work in rural areasange, some of them don’t. Some have extra features, others cover just the basics. What should you buy? And will a tv antenna work in rural areas?
Many people may make the argument that an indoor TV antenna will do the job just fine. And that would only be true for one or two situations, but generally, an outdoor TV antenna is a much better choice.
To begin with, you have the interference issue. An indoor antenna needs the signal to pass through your walls. That does interfere with the signal, and may impact your viewing experience quite a bit. Then you have interference from other wireless devices – your router, for example, may interfere with the reception. Even though you may think that this won’t have that much of an impact, if the broadcasting tower is far from you, that little bit of interference may mean the difference between watching TV and not getting any signal. An outdoor antenna, on the other hand, is placed further away from other wireless devices, and doesn’t need to go through walls in order to get a signal.
Then, there’s the signal strength thing. With an indoor antenna, you’re often limited with size, and a smaller antenna can’t have the same strength as a larger one. Larger antennas aren’t limited, because they’re often out in the open. This means that you’ll have a much more powerful antenna, especially if it’s amplified. You’ll be able to get signal from much further away, which gives you more options in terms of which broadcasting tower you’re getting your signal from.
To conclude, an outdoor antenna will work much better. The only downside is the installation, which is trickier outside, but that’s a one time thing, and you can always hire a professional to do this for you.
This greatly depends on your specific location and use case scenario. A directional antenna should be pointed in the direction of the broadcast tower you’ll be relying on for your TV signal. You’ll be limited to that tower only, as well as maybe another tower or two that are in the same line of sight, provided they’re in range. However, a directional outdoor TV antenna generally has a better range, which may make a significand difference.
On the other hand, you have omnidirectional antennas. They have a 360 degree coverage, meaning that they’ll receive signals regardless of which side the broadcast tower is located on. Even though this makes them much more versatile, they’re often limited in terms of range.
At the end of the day, it’s no secret that omnidirectional antennas are much better suited for densely populated areas, such as cities, where you’ll be surrounded by broadcast towers. If you’re looking for the best outdoor TV antenna for rural areas, though, you’re usually much better off with a directional antenna.
While we’re discussing this, it’s worth mentioning that you’ll want your directional antenna to point towards the right direction. For this, something like Antennas Direct’s transmitter locator service will show you where your nearest broadcast tower is, depending on your location. Just install the directional antenna so it points this way, and you should be good to go.
UHF and VHF are two terms that you’ll find with just about any antenna. These are used to explain the frequency of the antenna. VHF, or Very High Frequency, means the channel is transmitted on channels two to 13. UHF, or Ultra High Frequency, means that the channels are transmitted at channels 14 to 83.
Generally, today’s TV transmission is done in the UHF channel range. VHF is generally used for FM radio and similar applications. However, if you want to be sure, you’ll want to inquire about your specific local situation, so you’re sure you’re getting the right antenna.
One thing to note, however. Oftentimes, an antenna will advertise that it works with both UHF and VHF signals. This is certainly possible, and many antennas do this fairly well, but the optimal design for both types of frequencies is different.
VHF wavelengths are relatively long, and therefore a VHF antenna will require longer elements to work well. However, VHF frequencies are generally more efficient in inducing current, so they require fewer elements.
As a comparison, UHF wavelengths are usually much shorter, so the elements are shorter as well. On the other hand, they do require a lot more elements in order to provide a sufficient amount of signal amplification.
To sum things up, yes, an antenna that works with both types of signals is certainly something you can get. However, judging by the design, you can easily see which type will work better with it.
Arguably the most important parameter when it comes to buying an outdoor TV antenna is the gain, which somewhat directly translates into the range. Gain is basically the sensitivity of an antenna in a particular direction. An antenna with higher gain has a better ability to pick up weak signals.
Also, increasing an antenna’s gain makes the antenna more directive, and it requires that it is more accurately directed towards the broadcasting tower you’d be picking up the signal from. As a benefit, a higher gain will mean that less interference can affect the signal from other directions.
Obviously, this affects the antenna’s range. If you’re in a rural area, you’ll want to get an antenna that can pick signals up from the broadcast tower that you want to use, and that’s not always very near. Therefore, a longer range is usually beneficial.
Now, when it comes to range, you should know that you won’t always get the advertised range. It’s not just a case of manufacturers advertising a longer range than an antenna realistically has, but even something that has the slightest impact on the signal can generally reduce the range by quite a bit. Then there’s the case of weather – bad weather such as rain and thunderstorms can have a significant impact on the range of an antenna. Fortunately, there are manufacturers lately that have found ways to combat this, so many antennas actually work just as well even in bad weather.
If you know what an amplifier is, this should be clear. An amplifier will basically boost the strength of the antenna, impacting both the range at which it can receive signals, as well as the strength and quality of the signals it will receive. If you live in a rural area, It may be a good choice to get an antenna with an amplifier – they usually have a longer range and work much better. This is something you’ll definitely appreciate if you aren’t completely surrounded by broadcast towers.
With all that out of the way, we hope to have given you a few options as to what is the best outdoor TV antenna for rural areas. There truly are a lot of options, but we made sure to only include the best on our list – whichever one you get from the list, you can’t go wrong.
Also, our buying guide should answer any questions you may have about antennas and their specifications, and you should be well informed as to where your money should be spent.
Published March 28th 2019
Written By: Joseph Geizen (Electrician)
When you’re using a TV antenna, yet aren’t really satisfied with the quality of your experience, chances are you need an antenna amplifier. An amplifier will increase the strength of the signal, making things much better.
However, in your quest for the best TV antenna amplifier, there are a multitude of factors to consider. Do you need a preamplifier, or a distribution amplifier? How powerful should the amplifier be? Do you get an internal, or an external one?
To make things even more difficult, even if you do answer all of these questions, you’re left with a huge number of options that you’ll need to pick and choose from. Not all of them are made equal, and some may not make the difference you expect, thus making your investment less worthy than you might’ve thought.
Well, we’re here to help. For starters, we’ve got a couple of options that you’ll want to take a look at. They’re all great amplifiers from respectable manufacturers, and all of them will make quite the difference. However, they do have some differences, so you should choose one that works for you. Then, we have a buying guide, one that will explain some key features and differences, so you can make an informed buying decision. Without wasting any more time, let’s take a look at our options.
Before you choose an amplifier, you should consider some of the options. We've got 7 for you that have all performed admirably, and they're all great for some specific scenario.
Low on time? Heres a quick roundup of our top 3 picks and why you need them!
Great all-round pick with a high gain and very low noise figure
#2. Winegard LNA-100
*Best for indoor antennas
If you're only using an indoors antenna, this is the best choice for you
*Best budget option
A great pick for the budget-oriented users
The best overall antenna amplifier
The 1byone HDTV antenna is perfect for just about anyone, with an excellent range and great bad weather performance.
Our top pick is a bit surprising, as it’s one of the cheaper options on our list, yet performs admirably. It’s made by ANTOP, and it comes with their Smartpass technology that lets you switch on the amplifier for better reception, or switch it off to avoid overloading your tuner. The clear circuit technology will reduce signal dropout and give you a longer range and cleaner picture. Note, however, that this amplifier only works with a non-amplified antenna.
To add to the features, there’s a built-in 4G LTE filter which blocks both 3G and 4G wireless signals. They’re known to interfere quite a bit with TV antennas, but you won’t have that problem here. It has a maximum gain of 16dB, which is plenty, and a noise figure of less than 2dB, which is excellent. It’s also compatible with both VHF and UHF antennas, so you won’t be missing out.
The amplifier comes with all the hardware and cables you’ll need to get it up and running, and it’s really simple to set up. Considering all the features you’re getting, and of course the price, this is one that’s very hard to beat.
The best indoor antenna amplifier
If you need an amplifier for your indoor antenna, the Winegard LNA-100 is hard to beat
Our runner up comes courtesy of Winegard, and it’s their LNA-100 TV antenna amplifier. It’s a great alternative to our top pick, and it’s made to enhance the signal of just about any non-amplified antenna. One thing to know, though, is that it is made for indoor antennas.
It has Winegard’s amplified clear circuit technology with an extremely low noise figure of around 1dB, which is miles ahead of most of the competition. The typical gain is also 20dB, which means that it can get signals that you could barely receive, and make them into a great viewing experience.
If you have a non-amplified indoor antenna, this is one of the best options. Even though it’s a bit pricier, it has good gain and an incredibly low noise figure, making it definitely worth its asking price.
The budget-oriented top pick
Even though the price differences aren't that big, the 1byone is definitely our budget winner
1byone is a very reputable player in the antenna game, and they also have some excellent amplifiers as well. This specific model is extremely easy to set up and allows you to significantly boost your antenna’s signal.
It has a 20dB gain, which is fairly high. This is why 1byone don’t recommend using the amplifier if you live close to a broadcast tower – it can easily overpower your tuner and cause damage. The downside to it, and the reason why its third on our list and not higher, is the fact that it comes with a noise figure of around 4dB. This is far from low, and may cause more interference than you’d like.
On the other hand, the clear circuit technology will give you more channels and a better range than you’d get with just your antenna, and you’re also getting a power saving USB power supply. All things considered, it’s a great option for the budget oriented users that want 10 to 15 miles of extra range and a few more channels.
The best distribution amplifier for people who have more than a single TV set
We’ll talk about distribution amplifiers in a bit, but the CM3414 is a great example. It has four output ports, with 7.5dB gain per output. If you live in a household with multiple TV sets, this can mean that you have a significant quality loss. The CM3414 can help with this. It won’t only counter the effects, but also make things even better.
It has a forward frequency range of -54 to 1002 MHz, and a return path frequency range of -5 to 42 MHz. You can use it in CATV, HDTV, off-air, analog and digital RF distribution, making it a fairly versatile option. If you’re in need of a distribution amplifiers, this is the one to get, and it doesn’t cost too much.
Ideal if you have plenty of 3G/4G/LTE interference
Many TV antennas suffer from a popular issue lately – mobile broadcast towers interfere with their 3G and LTE signals. The Channel Master LTE Filter is meant to combat this, especially when you have pixilation or channel loss.
This is a highly effective filter, especially for US users, where frequencies above UHF channel 51 are used for services other than TV broadcasting. Note that this won’t really amplify any of the signals you are receiving – you may still need a preamplifier or an amplifier for that. However, you can connect it between the antenna and the amplifier, and it will filter the problematic signals, making the amplifier more effective.
If you're on a really really tight budget and have two antennas and TV sets, this might be ideal for you
Antenna users on a budget will love this 2-pack from EEEKit, as you get two amplifiers for less than the price of one higher quality one. If you have multiple antennas and want to amp the signal on both, without spending a lot, this could be a good option.
The amplifiers have a very high gain of 25dB, but unfortunately, that also comes with a noise figure of around 4dB. This is less than impressive, but it will get the job done. They’re powered via USB, so they won’t take up outlets, and they’re pretty small. If you’re on a budget, they’re a great pick.
The PCT 1-Port amplifier is great if you want to reduce pixilation and snow, and doesn't cost too much
Last but not least, we have a somewhat expensive, yet very good amplifier – the PCT 1-port amplifier. It significantly reduces pixilation and snow when you’re watching a channel with a weak TV signal, and it’s compatible with just about any over-the-air antenna signal.
You’ll be getting 15dB of signal boost, which is plenty, but still not too much so it overpowers your tuner. One thing to note though – this isn’t compatible with satellite TV, and it will cause more harm than good if used with one.
If you’re using splitters or long cable runs, you’ll want to install the PCT before them, as this is what gets you the best results.
If you took a look at our options, you’re noticing that they vary greatly, and this may make choosing one a bit difficult. Let’s take a look at the key things to know, so you can choose the right amplifier for you.
This is the first question you’ll want to ask yourself. There are three types of amplifiers, and they’re all made for a different scenario. An amplifier generally amplifies the signal in general, but preamplifiers and distribution amplifiers are made for specific situations.
Preamplifiers are used to compensate for the loss of a signal due to a long cable run. These situations often happen in large houses, or areas where you have quite a lot of cable going from the antenna to the TV set. When you have a signal that is weak, a long cable can make watching TV impossible. If this is the type of issue you have, a preamplifier is the device you need. They’re commonly placed outdoors, right next to the antenna itself.
A distribution amplifier is used in a completely different scenario. When you’ve got multiple TVs or receivers that all get their signal from a single antenna, you’re losing quite a bit. For example, a two-way splitter results in a loss of around 4dB of signal, whereas a three or four-way splitter will result in losses of around 8dB. You’re in a hotel? An 8-way splitter loses around 14-15dB. A distribution amplifier will increase the signal to overcome any losses that may come out due to the use of splitters.
Even though the two types are distinctly different and choosing which one you need shouldn’t be difficult, there’s always the scenario where you actually need both. Imagine this – your antenna is on a 100-feet tall tower. You’re 30 feet away from the house, and you have four TVs inside your house that all need a signal from the antenna. Only if you get both will you be able to watch TV on all of them, without noticeable quality drops.
When you’re looking at amplifier specifications, you’ll come across a variety of numbers. Yet, none of them are as important as the gain. We already spoke about signal loss due to cable length or splitters, and you’ll want enough gain to compensate for that.
For example, if you have 100 feet of cable, with an RG6 cable, that’s more or less 8dB of loss. To compensate for that, you’ll want an amp that is at least 8dB, or stronger. They usually range from 12 to 30dB, so get what’s most appropriate for you.
One thing to know, though, is that a higher-gain amp isn’t always better. If you have a 15dB loss, and you use a 30dB amp, that can be counterproductive and can overdrive your tuner with too much signal. Your safest bet would be to get a rough estimate on your signal loss (or an exact number, which is even better), and get an amp that has 2-3dB more than that.
When you have a digital signal, the noise figure is just as important as the gain is. Whenever you add any kind of amplifier to a system, you’re introducing a certain amount of noise. The higher the noise figure is, the lower the tuners sensitivity to picking up the signal is. Therefore, you’ll want to get something with a low noise figure, for example 2dB. Something with a noise figure that’s 4-6dB is something you should definitely stay away from if possible.
With your antenna, it’s either receiving UHF or VHF signals, or both. When you’re buying the best TV antenna amplifier, you’ll want to match your antenna. For example, if your antenna receives both, you’ll want an amplifier that passes both as well. Using such an antenna with an amp that’s only UHF or only VHF will result in the other frequency being blocked. Most of the amplifiers on the market actually pass all frequencies, but make sure you read the specs well.
We spoke about gain, and how too much can actually overdrive your tuner. An amplifier with auto gain control will reduce the gain of a signal that is too strong. You have some amplifiers that have advanced auto gain control that amplifies weak signals as much as possible, yet limits the strong ones to prevent any potential damage. Also can be adapted to omnidirectional tv antennas.
At the end of the day, it's the ANTOP Smartpass Amplifier that takes the win.
Even with a decent 16dB gain, it won't overpower your tuner, and there's a low noise figure of less than 2dB.
If you want the best overall amplifier, this is the one to go for.
At the end of the day, if you have weak signal, it is more than likely that you can solve it with an amplifier. We hope to have cleared all the terminology that you’ll come across when looking for the best TV antenna amplifier. All that’s left for you to do is to choose the one from our list that is most suitable for you, and set it up. Voila, no more weak signal issues! If your still not sold on these models check out a guide on how to make a amplifier.
Published March 28th 2019
Written By: Joseph Geizen (Electrician)
Buying a long range TV antenna may sound like a trivial task. However, there are a lot of factors to consider, some of which may make or break your TV viewing experience. Therefore, you’ll want to get the best long range TV antenna you can find, one that won’t make too many compromises and will work well no matter what.
The thing is, choosing which one to get isn’t all that easy. You’ve got plenty of factors to consider, and even when you think you’ve got the specifications figured out, you have a host of options to choose from, not all of which are good.
All of this can make an informed buying decision difficult to make. Fortunately, we’re here to help. To begin with, we’ll give you a short buying guide on all the factors that constitute the best long range TV antenna. We’ll discuss antenna types, gain and range, frequencies etc. Afterwards, we’ll talk about a few options that are all excellent in their own regard. Whichever one you choose, you won’t be making a mistake. You can find a more general guide to the best outdoor tv antenna here.
Without wasting any more time, let’s start things off with our options.
Low on time? Heres a quick roundup of our top 3 picks and why you need them!
#1. Free Signal tv marathon
Excellent as an overall outdoor TV antenna with a lot going for it
#2. Xtreme signal hdb91x
A good alternative if you don't need too much range, but need durability
1plus hdtv antenna
A champ in terms of range
The Best Overall Long Range TV Antenna
The Free Signal TV Marathon antenna doesn't have the best range, but it's respectable and has a host of other features.
Even though the design is somewhat unconventional, the Free Signal TV Marathon may very well be the best long range TV antenna. Sure, there are others that offer more range, but they lack quite a bit in terms of other features.
To begin with, the promised range is 100 miles. The great thing is that you’ll actually achieve this promised range in good conditions. And even when the weather is subpar, you’ll find that there’s minimal quality loss. There is 40dB gain, and less than 3.5dB noise, which makes this one of the best long range options on the market today.
The built-in signal amplification allows it to receive 4K signals, and there’s an LTE filter that deals with all the noise from any LTE/4G towers nearby. It’s really easy to set up, and you can even connect multiple TV sets to it. All things considered, a great option!
The Most Durable Long Range TV antenna
Xtreme Signal's HDB91X is as durable as they come, and it still has a good range
Coming in at a range of only 70 miles, it’s obvious that the range of the HDB91X isn’t its strongest suite. However, it is still very respectable, and very much qualifies for a long range antenna. You’ll get those 70+ miles with UHF signals, and you’ll also get around 25 miles of range for high band VHF signals. This is a great combination, one that should cover most of the users out there.
The design and construction of the HDB91X make it weatherproof and very durable. There’s a strong back reflector which improves the overall signal quality by reducing the interference from the back. You’ll also get a built-in pigtail transformer which helps with the signal. With a maximum gain of 16dB, this is our runner up for the title of best long range TV antenna and can be great for rural areas aswell.
The Best Range On Our List
The 1Plus HDTV Antenna is the pick with the best range, but it doesn't perform as consistently as our top two.
Our third option is the one on our list that has the most range. It comes courtesy of 1Plus, and you can expect an impressive 150 miles of range for HD TV signals reception. It works with 720p, 1080i and 1080p, and you can receive both VHF signals at 40 to 300 MHz, as well as UHF signals at 470-890 MHz.
It is completely weather resistant, including the motorized part. Yes, there is a motorized part that allows it to rotate 360 degrees, and you control it with a remote. This means that even though this is a directional antenna, changing the direction, and therefore the broadcast tower you’re receiving from, is very easy.
The 8 Element Bowtie is a very popular option, and it does great as a long range antenna
The inspiration for many DIY guides on outdoor TV antennas, the Antennas Direct 8 Element Bowtie is an excellent long range option. With a 70 mile range, out of all options on our list, this is the antenna that is least susceptible to things such as rainy weather and thunderstorms.
The antenna allows for easy installation, and you get all-weather mounting hardware. You can receive channels in full HD, where available, and the beam angle is 24.5 degrees at 470 MHz, to 16.3 degrees at 698 MHz, which is the UHF range for this antenna.
If you need a durable option, you should definitely consider it – it does come with a lifetime warranty on parts, after all.
Another Antennas Direct option, this time for both indoor and outdoor use
While most of the best long range TV antenna options are meant to be used outdoors, the Antennas Direct ClearStream 4 can be used both indoors and outdoors. Like the 8 Element Bowtie, it also has a 70 mile range, but unlike it, this one is more susceptible to interference.
The multidirectional elements do allow you to receive a signal from more locations, though, and you can get 1080p TV where available. It’s also 4K ready, but there aren’t many channels that you can get in 4K. Also like the 8 Element Bowtie, the ClearStream 4 has lifetime warranty on the parts, so you can be sure that you’re getting a very durable antenna.
Somewhat shorter range compared to the competition, but the promised range is what you're really getting
Compared to the competition, which usually has at least 70 miles of range, the 1byone’s 50 miles may not seem like much. But the thing is, most of those 70 mile antennas won’t get 70 miles of range, which isn’t the case with the 1byone. Regardless of the weather and how bad it is, or other interference, you’re still getting 50 miles of range, much thanks to the built-in amplifier.
It has reception for UHF and VHF channels, as well as FM, and has 28dB of gain. There’s also a noise figure of less than 3dB, which is excellent. It’s powered via a USB power adapter, and if you care about your home’s outside looks, you’ll be happy to know that you can safely paint it without affecting reception or losing signal.
A very durable option with both UHF and VHF support
We’re wrapping up our list with another antenna by Xtreme Signal, this time their HDB8X-NI. It has a range of over 60 miles for UHF signals, and around 25 miles for high band VHF ones. Even though it’s a large antenna by design, it is one that’s very durable and weather resistant, and will last you for a good while.
An interesting addition is the fact that you can have each side aimed independently to pull broadcasts from two directions at once. If you wanted to add some versatility to the antenna, this is how you do it. All things considered, it’s a great option for people who have two broadcast towers nearby, in a different direction, and want to get the signals from both.
Best long range TV antenna 500 miles
When it comes to long range TV antennas for very long ranges, you will find that even the best long range TV antennas top out at around 150 miles. Chances are you won't find anything with a better range, and the 1Plus HDTV antenna we mentioned earlier, at position number 3, is our top pick here.
But, why can't you find something with a range longer than 150 miles? The thing is that you won't need anything more than that. Wherever you live, chances are there is a broadcast tower within 150 miles (often much closer). This basically negates the need for a longer range.
Now that we got the options out of the way, let’s take a look at how to choose the antenna, and what all those numbers, benefits and terms mean.
The first thing you’ll notice when shopping for the best long range TV antenna is the different antenna types. There are three main types – directional, multidirectional and omnidirectional. They’re all good in some specific situations, but which one you go for can depend on your exact requirements.
The first antenna type are directional antennas. They only see in one direction, so you’ll want it to point towards the broadcast tower you’ll be receiving your signal from. Something like OTA DTV’s service should allow you to get that right. Even though they require a bit of set up to get everything working well, directional antennas can receive signals from much further away, making them possibly the ideal choice for the best long range TV antenna. Thanks to them only seeing in one direction, they’re also fairly resistant to distortion and noise from other directions.
Next, we have multidirectional antennas. They have a wider range in terms of signal reception, which allows them to receive signals from multiple directions. Even though this can be useful in a populated area which has multiple broadcast towers, a multidirectional antenna will usually be susceptible to distortion and noise from those other directions as well. They’re not really great if you need something with a long range and minimal susceptibility to interference.
Last but not least, there are omnidirectional antennas – they have 360 degree coverage and can receive a signal from just about any direction. These are the best choice for densely populated areas, such as cities, where there are plenty of broadcast towers surrounding you, and they’re all nearby. However, when it comes to range, this is the weakest type of antenna you can get, so it’s not a good choice for the best long range TV antenna.
With a long range TV antenna, this is usually the most important factor you’ll want to consider. A few things to note here, though. First, not all antenna manufacturers advertise the real range. Some may add a mile or two to it, to make the antenna seem like a more attractive choice. The catch is that even if the antenna can achieve that range, chances are that you’ll only get that in absolutely perfect conditions – ideal weather, no interference, etc. Most of the users also need the antenna to work when conditions aren’t ideal, so take the advertised range with a grain of salt.
On the other hand, many manufacturers lately have seemed to figure out ways to reduce how much of an impact weather and other interference has on the range, especially when we’re talking about directional antennas. We’ll talk about the range later on, when we take a look at the options, but you’ll want the range to be your top priority when you’re choosing the best long range TV antenna.
When you’re looking at antennas, you should definitely consider the maximum video quality that the antenna can pick up. There are two main types. Generally, a good antenna will be able to easily pick up a Full HD signal at 1080p. Most TV sets are 1080p today as well, which means that you should be able to take advantage of your TV set’s full resolution.
However, if you have a more expensive TV set, it may be an ultra high definition panel, where the resolution is 4K. If you want to best take advantage of it, you should invest a bit more and get an antenna that can receive signals in 4K.
The decision is up to you, but you should be aware that antennas that receive 4K signals may cost quite a bit more than ones that don’t.
Whatever antenna you’re looking at, you’ll find it being advertised as either UHF or VHF, or both. These are terms that are used to explain what frequencies the antenna works at. VHF channels, which stands for Very High Frequency, are usually transmitted at channels 2 to 13. On the other hand, UHF, or Ultra High Frequency, transmits signals at channels 14 to 83. As a general rule, today’s TV transmission is done on the UHF channels, but you might want to inquire about your specific situation before you order.
Yes, you’ll come across antennas that are advertised as ones that work with both VHF and UHF. They do, it’s not a marketing thing, but the main design requirements for both types are somewhat different. According to the design of the antenna you’re looking at, you can recognize what type of signals it works better with.
For example, with VHF, the wavelengths are usually fairly long. Therefore, a VHF antenna requires longer elements in order to work at its best. On the other hand, those frequencies are more efficient when it comes to inducing current, therefore requiring less elements.
With UHF, on the other hand, you have shorter wavelengths, and therefore you need shorter elements. They require a lot more elements, though, making them a bit more complex.
The last thing you’ll want to consider when you’re shopping for the best long range TV antenna is whether the antenna has a built-in amplifier. With an outdoor TV antenna, an amplifier will usually boost the range by a significant amount, but you also get better reception at shorter ranges. To the end user, this translates into higher quality, and an overall better TV viewing experience. When it comes to longer ranges, you should get an amplified one if possible.
Our overall top pick would be the Free Signal TV Marathon.
With an unconventional design, it is our choice for the best long range TV antenna.
Even though there are options with more promised range, we'd still pick the Marathon for its consistency and extra features.
Finding the best long range TV antenna can be tricky, but we hope to have given you a few options, as well as an informative guide on how to choose the right one. Good luck with your shopping!